Hub Centric Wheel Spacers – 5×120 PCD 66.9mm Hub (Pair)

Suits: Holden Commodore VE, VF


Hub Centric Wheel Spacers – 5×120 PCD 66.9mm Hub (Pair)

Hub Centric Wheel Spacers – 5×120 PCD 66.9mm Hub (Pair)

Suits: Holden Commodore VE, VF

Suits: Holden Commodore VE, VF

$ 52.00 USD

- +
SKU: HFM-SPACE-003 Categories: , Tag:


Our wheel spacers are hard anodized with a matte black finish. They are made of high quality 6061-T6 aluminium and include 10.9 graded bolts.

When installing HFM spacers, we recommend using a square hex socket to ensure a snug fit which will prevent rounding the corners of the nut. Do not use an air ratchet, always tighten the nuts by hand and then torque to 80-86 ft lb’s.


Holden Commodore VE
Holden Commodore VF


PCD – 5 x 120mm
HUB – 66.9mm
OD – 164mm
Bolt Type – M14 x 1.5

What You Get

1x Pair of billet aluminium wheel spacers


Q. How do I know if these wheel spacers will fit my car?
A. These wheel spacers must be matched to your vehicles PCD and Hub. If they are 5 x 120 PCD with a 66.9 Hub, then these will fit.

Q. Will these spacers be Hub Centric?
A. Yes, they are Hub Centric to suit a 66.9mm hub.

Q. Will I need to cut my wheel studs?
A. Your rim will need to sit flush with the wheel spacer, If your wheel studs protrude further than the spacer, interfering with the rim, you will need to trim the studs down.

Q. What torque settings should I use?
A. As per the factory settings, we recommend 89 ft lbs or 120 Nm. If you use a higher setting you risk stripping the stud from the spacer.


Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us at